User Manual Q&AAnswer
Feb 27, 2025 - 02:08 AM
To install the LinmoreLED CH2 Series fixtures, follow these general instructions:
1. Consult a licensed electrician or electrical contractor before installation.
2. Inspect the packaging for any signs of damage and notify the carrier if necessary.
3. Unpack the fixtures and inspect them for any damage. Contact LinmoreLED if any damage is observed.
4. Turn off the electricity at the main circuit breaker, panelboard, fuse box, or disconnect before installation.
5. Ensure that the mounting surface can support the weight of the fixture.
6. Make sure there is proper airflow around the fixture.
7. Choose the appropriate installation method based on your needs: Cable Ready Mount (CRM), Surface Mount (MBR and fixtures with EMB or EMB2), Rigid Stem Mounting Option (Stem), Hook, Plate Mount (CRM), or Hanger Mount (CRM).
8. Follow the specific installation instructions for your chosen method as outlined in the manual.
9. Make final wiring connections according to the wiring instructions provided in the manual.
10. Close the wireway cover and insert the safety xxxx provided.
11. Turn on the electricity at the circuit breaker, panelboard, or fuse box to test the fixture.
Please refer to the LinmoreLED CH2 Series Commercial and Industrial LED Fixtures Instruction Manual for detailed installation instructions and diagrams specific to your chosen installation method.
Add New Comment