User Manual Q&AAnswer
Feb 27, 2025 - 02:00 AM
To install the PHILIPS 929003188201 Splay Wall Lamp, please follow the installation instructions provided in the user manual. Here is a step-by-step guide:
1. Start by gathering all the parts included in the package. The parts should include the wall lamp itself, screws, and any additional accessories mentioned in the manual.
2. Make sure you have the necessary tools required for installation. The manual should specify the tools needed, but typically, you may need a screwdriver, a drill (if required), and possibly a level for accurate installation.
3. Before starting the installation, ensure that the power is turned off. This is crucial for your safety. Locate the power switch or circuit breaker that controls the electrical supply to the area where you will be installing the wall lamp and turn it off.
4. Determine the desired location for the wall lamp. Consider factors such as the height, proximity to power outlets, and the overall aesthetic of the room.
5. Hold the wall lamp against the wall in the chosen location and mark the positions for the screws. Use a level to ensure the lamp is straight.
6. If necessary, use a drill to create pilot holes at the marked positions. This will make it easier to insert the screws.
7. Attach the wall lamp to the wall using the provided screws. Make sure the lamp is securely fastened.
8. Once the lamp is installed, turn the power back on and test the lamp by switching it on and off.
For more detailed instructions and illustrations, please refer to the user manual of the PHILIPS 929003188201 Splay Wall Lamp.
Add New Comment