User Manual Q&AAnswer
Feb 27, 2025 - 01:46 AM
To install and connect the elero Revio-868 P Built-in Radio Receiver, please follow these steps:
1. Ensure that the device is not damaged before installation or use. Only use unmodified original elero parts.
2. All installation work must be carried out by a qualified electrician who has read and understood the operating instructions.
3. Install the device in a dry room and ensure that the operating range of the transmitters stays visible during operation.
4. Keep children away from the controls to prevent any accidents.
5. Connect the device according to the provided connection instructions. It is recommended to consult the structure of a controller on elero.com for detailed information.
6. Take note of the safety precautions when making the connections, such as using insulated tools and ensuring proper protection against electric shock.
7. Optimize the radio signal by avoiding kinks, shortenings, or extensions of the antenna. Install the antenna in an exposed position, away from metal surfaces.
8. If you are controlling multiple drives using the Revio-868 P, make sure to decouple the drives with relay controls.
Please refer to the elero Revio-868 P Built-in Radio Receiver Instruction Manual for more detailed instructions and diagrams on installation and connection.
Add New Comment