User Manual Q&AAnswer
Feb 27, 2025 - 01:17 AM
To assemble the stand for the GOLD NOTE A6 EVO II Three Way Floor Standing Loudspeaker, follow these steps:
1. Carefully place the loudspeaker upside down or lay it horizontally on a table, making sure to cover the supporting surface with a soft cloth to avoid scratches.
2. Insert the spike feet into the 4 holes on the base and tighten them firmly to lock them in place.
3. Insert the M4x35 screws into the 4 outer holes and tighten them firmly to join the base.
4. Insert the M4x20 screws into the 2 central holes and tighten them firmly to join the base.
5. Turn the loudspeaker upside down and place the base on the ground, ensuring that the spike feet sit on the spike pads to prevent damage to the floor.
Please note that it is important to use the correct type of screws for each step and to pay attention to the instructions in the manual for proper assembly.
For more detailed instructions and illustrations, refer to the "ASSEMBLING THE STAND" section in the GOLD NOTE A6 EVO II Three Way Floor Standing Loudspeaker User Manual.
Add New Comment