How do I install the Leonton Industrial Gigabit PoE+ Ethernet Switch? (Leonton 16-Port Industrial Gigabit PoE+ Ethernet Switch User Manual)

Answer

manuals.plus

Feb 27, 2025 - 12:51 AM


To install the Leonton PG2-1600 16-Port Industrial Gigabit PoE+ Ethernet Switch, follow these steps:

1. Unpack the switch from the original packing box.
2. Check if the DIN-Rail bracket is screwed on the switch. If not, refer to the DIN-Rail Mounting section in the manual for installation instructions. If you want to wall mount the switch, refer to the Wall Mounting section for installation instructions.
3. Hang the switch on a DIN-Rail or wall according to the Mounting Installation section.
4. Power on the switch. The power LED light will turn on.
5. Prepare a twisted-pair, straight-through category 5 cable for Ethernet connection.
6. Insert one side of the RJ-45 cable into the switch's Ethernet port and the other side into the networking device's Ethernet port (e.g., switch, PC, or server). The Ethernet port's LED on the switch will turn on when the cable is connected.
7. If your switch has SFP ports, insert one side of the SFP cable into the switch's SFP port and the other side into the networking device's SFP port (e.g., switch or server). The SFP port's LED on the switch will turn on when the cable is connected.
8. When all connections are set and the LED lights show normal operation, the installation is complete.

Please refer to the manual for additional information and troubleshooting tips. If you encounter any issues, you can contact Leonton Technologies for technical support.