User Manual Q&AAnswer
Feb 27, 2025 - 12:49 AM
To assemble the COSTWAY BB0506 Baby Playpen, follow these steps:
1. Remove all packaging and separate and count all parts and hardware before installation.
2. Insert the longer tubes (995mm) into the fabric and connect them with the middle plastic connector.
3. Connect the shorter tubes (695mm) with the corner plastic connector.
4. Insert the stand tube into the fabric and connect it with the plastic connector.
5. Install the top rail tubes of all four sides and connect them with the plastic connector. Note that the side with the zipper should be assembled at the last step.
Please refer to the provided images in the manual for a visual representation of the assembly process.
It is important to regularly check whether the fastening elements of each part are firm. Once assembled, make sure that the playpen is securely assembled and that all parts are locked in place. Do not disassemble the playpen when the baby is inside, and do not allow your baby to climb out of the playpen.
If you encounter any difficulties during assembly, carefully check the playpen and follow the instructions provided in the manual to avoid any damage.
Please remember to always supervise your child while using the playpen, and do not use it without the mattress provided. Additionally, do not leave anything in the playpen that could lead to suffocation or strangulation.
For further assistance or if you have any missing or damaged parts, please contact Costway's friendly customer service department. They will be able to provide you with the necessary support and arrange replacements if needed.
Add New Comment