User Manual Q&AAnswer
Feb 27, 2025 - 12:44 AM
Sure! Here is a step-by-step guide on how to install the EMTEK Privacy Sandcast Bronze Rustic Modern Rectangular lock:
1. Use the Cylinder Key to thread the Drive Bar Cylinder clockwise on the interior side of the door. Make sure the notches on the cylinder are parallel with the horizontal plane when fully screwed into the lock body. This ensures proper alignment.
2. Install the Lock Body on the interior side of the door. This is the mechanism that will secure the door.
3. Install the outside and inside plates on both sides of the door. These plates provide additional support and protection for the lock.
4. Tighten the Key Cylinder to secure it in place. Ensure it is firmly attached to the lock body.
5. Install the Trim Plate on the interior side of the door. This plate adds a decorative touch to the lock.
6. Lastly, install the Door Jamb according to the provided template for door jamb prep specifications. This ensures proper alignment and functionality of the lock.
Please refer to the installation guide provided with your EMTEK Privacy Sandcast Bronze Rustic Modern Rectangular lock for more detailed instructions and any specific requirements for your particular door.
Add New Comment