User Manual Q&AAnswer
Feb 27, 2025 - 12:35 AM
To connect and set up the PULSEAUDIO PA230SWA in-wall Wi-Fi streaming amplifier, follow these steps:
1. Trace and cut out a single-gang hole in the wall and insert a single gang electrical box.
2. Connect the speaker and power cables, ensuring that the power is not active.
3. Install the PA230SWA into the electrical box in the wall.
4. Power on the unit.
5. The Bluetooth (BT) status LED will quickly blink to be in open pairing mode.
6. Search and connect to the Bluetooth labeled "Pulse BT".
7. Enter the password found on the sticker on the back of the unit before installing into the wall.
8. After 3 minutes of no pairing or no signal, the unit will automatically go into pairing mode.
9. For an Aux-In source, plug in an audio cable and play.
10. The unit will automatically switch between Bluetooth (BT) and Aux-In. If both sources are connected and live, priority is given to the Bluetooth source.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment