User Manual Q&AAnswer
Feb 27, 2025 - 12:27 AM
To install the REAL-EL Stab Energy-500 Automatic Voltage Regulator, please follow these steps:
1. Before connecting the regulator, make sure that all consumer devices connected to it are turned off.
2. Ensure that the total power of all voltage consumers is lower than the AVR power. Take into account the starting load and power factor of voltage consumers and apply a power margin factor of 1.2-1.5. For equipment such as air conditioners, fridges, and electric motors, the power margin factor should be 1.5-2.
3. Connect the AVR to a 230V household mains and switch it on using the power switch.
4. If the AVR operates properly, the digital indicator will display the voltage on the AVR output, which is the output voltage. Only after that, turn on the connected consumer devices.
Note: If the mains voltage exceeds the operating range of 150-270V, the AVR will automatically disconnect the load (connected devices).
For more detailed instructions and safety precautions, please refer to the REAL-EL Stab Energy-500 Automatic Voltage Regulator User Manual.
Add New Comment