User Manual Q&AAnswer
Feb 27, 2025 - 12:23 AM
The SystemQ IPCAI858 360 Degree Camera can be powered in two ways:
Option 1: You can power the camera using a 12V DC power source. Connect the power source to the camera's 2.1mm DC Socket. Please ensure that the polarity of the connections is correct. The camera has a current consumption of 500mA.
Option 2: Alternatively, you can power the camera using a PoE (Power over Ethernet) 48V RJ45 Socket. If you are connecting the camera to a ZIP PoE NVR, simply plug the camera directly into the NVR's built-in PoE switch. The camera should automatically become visible after being connected for approximately 1 minute.
If you are using a separate PoE switch or an IPmitter (wireless bridge), you will need to manually configure the camera. You can refer to the "how to guide" by scanning the QR code provided in the manual.
Please note that the camera's power source will depend on your specific setup and requirements.
Add New Comment