User Manual Q&AAnswer
Feb 27, 2025 - 12:15 AM
To properly install the BATTLE BORN BB5024H 50Ah 24V LiFePO4 Deep Cycle Battery, please follow these steps:
1. Identify the positive and negative terminals on the battery. These are labeled and color-coded red for positive (+) and black for negative (-).
2. Determine the appropriate finishing hardware set to use. Verify that your bolt can fully seat into the nylok insert of the nut. If multiple lugs are used, longer bolts may be required.
3. Connect your cable lugs to the battery terminals using the finishing hardware set. Make sure to connect the positive load specified cable lug to the positive terminal and the negative load specified cable lug to the negative terminal. Refer to Fig. 1 in the manual for the proper order of hardware.
4. Use a torque wrench to tighten the hardware to the specification of 9 to 11 ft-lbs. Do not finger tighten. Failure to secure connections adequately can result in severe damage and void the warranty. Refer to Fig. 2 in the manual for examples of proper and improper connections.
Please note that it is important to follow all safety instructions and consult the manual for additional information on installation, operation, and maintenance of the battery.
Add New Comment