User Manual Q&AAnswer
Feb 27, 2025 - 12:13 AM
To install an EMTEK Pocket Door Lock, please follow the step-by-step instructions provided in the manual:
1. Door Prep: Ensure that your pocket door is properly prepared for the lock installation. This may involve drilling holes or making necessary adjustments to the door to accommodate the lock mechanism.
2. Jamb Prep: Similarly, prepare the door jamb to accommodate the lock strike plate. This may involve chiseling out a recessed area or making adjustments to the jamb to ensure proper alignment with the lock.
3. Loosen xxxx : Before installing the lock to the door, it is important to loosen the pan head screws on both sides of the lock. This will allow for easier installation and adjustment.
4. Install Lock: Place the lock into the prepared door, aligning it with the drilled holes or recessed areas. Ensure that the lock is centered and level. Once in position, tighten the pan head screws to secure the lock to the door.
5. Secure Lock: After installing the lock, it is crucial to re-tighten all the pan head screws to ensure the lock is securely fastened to the door.
6. Secure Pocket Door: To further secure the pocket door, use the wood screws provided with the lock to attach the door to the pocket. Alternatively, you may use machine screws if preferred.
Please note that the above instructions are a general overview. For more specific details and illustrations, it is recommended to refer to the EMTEK Pocket Door Lock Installation Instructions manual that came with your product.
Add New Comment