User Manual Q&AAnswer
Feb 27, 2025 - 12:02 AM
To adjust the speed limiter on your Pulsar 2019+ 3.0L Diesel, follow these steps:
1. Access the Programming Menu by turning off the vehicle and without putting your foot on the brake pedal, hold the Start Engine button until the truck gauges turn on and a green light is seen on the start button (approximately 5 seconds).
2. Adjust the vehicle's screen cluster to the digital speedometer.
3. Hold the cancel cruise control button until the speedometer sweeps to 140 (approximately 5 seconds).
4. Use the +RES or -SET wheel to navigate to mode 10 (Speed Limiter Adjustment).
5. Press the cancel cruise control button to select the mode.
6. Use the +RES or -SET wheel to adjust the speed limiter to the desired value between 82 and 124 MPH.
7. Press the cancel cruise control button to save the input value.
8. The speedometer will sweep to 140 MPH, indicating that the speed limiter adjustment is complete.
Please note that adjusting the speed limiter should only be done for use in closed circuit, legally sanctioned racing environments and not for use on public roadways.
Add New Comment