Answer

Feb 27, 2025 - 12:00 AM
Here is a step-by-step guide on how to install the EMTEK Modern Rectangular Barn Door Privacy Lock:
1. Door Prep:
- Measure and mark the desired location for the lock on the door.
- Use a drill to create a hole for the lock body and a hole for the strike pull.
2. Install Strike Pull:
- Insert the strike pull into the hole on the edge of the door.
- Secure it in place using the provided screws.
3. Install Mounting Base:
- Place the mounting base over the hole for the lock body on the face of the door.
- Ensure that the mounting base is aligned properly with the strike pull.
- Secure the mounting base to the door using the provided screws.
4. Install Lock Body:
- Insert the lock body into the hole on the edge of the door.
- Ensure that the lock body is properly aligned with the mounting base.
- Secure the lock body to the door using the provided screws.
Optional for Egress:
- If you require the ability to unlock the door from the outside, follow these additional steps:
- Install the egress plate on the outside of the door, aligning it with the lock body.
- Secure the egress plate using the provided screws.
Please note that this installation guide is a general overview. It is important to refer to the specific instructions provided in the EMTEK Modern Rectangular Barn Door Privacy Lock manual for detailed and accurate installation steps.
Add New Comment