User Manual Q&AAnswer
Feb 26, 2025 - 11:54 PM
According to the PHILIPS 9290031886 Splay Wall Lamp user manual, here are the installation instructions:
1. Tools: Before starting the installation, make sure you have the following tools: a screwdriver, a drill, and appropriate screws and wall plugs.
2. Power Off: Ensure that the power supply to the installation area is switched off before starting the installation process.
3. Installation Instructions:
a. Choose the desired location on the wall where you want to install the lamp. Ensure that the wall is strong enough to support the weight of the lamp.
b. Hold the lamp against the wall in the desired position and mark the locations for the xxxx holes.
c. Drill holes at the marked positions using an appropriate drill bit, and insert the wall plugs into the holes.
d. Align the lamp with the holes and secure it to the wall using the provided screws.
e. Ensure that the lamp is securely attached to the wall.
4. Power On: After completing the installation, you can turn on the power supply to the lamp.
5. Attention: Please note that this lamp is designed for indoor use only. Do not expose it to water or moisture. If you encounter any issues during installation or usage, refer to the troubleshooting section of the user manual or contact PHILIPS customer support for assistance.
For more detailed instructions and safety information, please refer to the PHILIPS 9290031886 Splay Wall Lamp user manual.
Add New Comment