User Manual Q&AAnswer
Feb 26, 2025 - 11:50 PM
To mount the Netzer DS-37 Absolute Rotary Encoder, follow these steps:
1. Attach the encoder rotor to the host shaft by pressing it against a dedicated shoulder. Use a xxxx and washer or circular spring and washer at the end of the shoulder to maintain pressure.
2. The encoder stator is centered by a circumferential step and attached to the host stator using three M2 encoder clamps.
3. Ensure that the relative axial mounting distance "H" between the shaft shoulder and stator mounting recess is 1.5 mm nominal. For ease of mechanical mounting compensation, the recommended distance is 1.6 - 0.05 mm.
4. To compensate for amplitudes, you can use 50 um shims below the rotor. Verify proper rotor mounting with the Encoder Explorer tools "Signal analyzer" or "Mechanical installation verification."
Note: Do not use xxxx -locking materials that contain Cyanoacrylate, as they can interact aggressively with the sensor body made of Ultem.
For more detailed information and illustrations, please refer to the "Encoder Mounting" section in the Netzer DS-37 Absolute Rotary Encoder User Manual.
Add New Comment