User Manual Q&AAnswer
Feb 26, 2025 - 11:49 PM
To install the EMTEK Rosette Style Door Bumper, please follow the steps below:
1. Drill Holes: Begin by marking the desired location for the door bumper on the wall. Use a pencil or marker to make the markings. Ensure that the location is suitable for preventing the door handle from hitting the wall.
2. Install Door Bumper: Once the markings are made, use a drill to create holes in the wall at the marked locations. The size of the holes should match the screws provided with the door bumper.
3. Use #2 Phillips screwdriver to install wall bumper to wall: Take the EMTEK Rosette Style Door Bumper and align it with the drilled holes on the wall. Insert the screws through the holes in the door bumper and into the drilled holes in the wall. Use a #2 Phillips screwdriver to tighten the screws securely.
4. Ensure proper installation: After installing the door bumper, check to make sure it is securely attached to the wall. Test the door by opening and closing it to ensure that the door handle makes contact with the bumper, preventing any damage to the wall.
Please refer to the provided installation guide, labeled "IN4-WALLBUMPER REV 2 11-23-21," for any additional details or specific instructions related to your EMTEK Rosette Style Door Bumper.
Add New Comment