Answer

Feb 26, 2025 - 11:29 PM
Sure! Here is a step-by-step guide on how to install the EMTEK Urn Style 2620 Door Knocker using the provided template and through bolts, as outlined in the installation guide:
1. Start by gathering the necessary tools and materials, including the door knocker, through bolts, pliers, a 5/16" drill bit, and the provided hole template.
2. Position the hole template at the desired location on your door, ensuring it is level and aligned with your preferences for the door knocker's placement.
3. Using the hole template as a guide, carefully drill two holes in the door using a 5/16" drill bit. Make sure to drill straight and avoid damaging the door surface.
4. Once the holes are drilled, remove the hole template from the door.
5. Take the through bolts provided with the door knocker and thread them onto the set screws of the knocker. Use pliers to ensure that the bolts are securely tightened onto the set screws.
6. With the through bolts attached to the door knocker, align the knocker with the drilled holes on the door.
7. Insert the through bolts into the drilled holes, ensuring that the knocker is properly positioned and aligned.
8. Once the knocker is in place, use a screwdriver or appropriate tool to tighten the set screws on the through bolts. This will secure the knocker to the door.
9. Double-check that the knocker is securely fastened and properly aligned. Make any necessary adjustments if needed.
Congratulations! You have successfully installed the EMTEK Urn Style 2620 Door Knocker using the provided template and through bolts. Enjoy your new door knocker!
Add New Comment