User Manual Q&AAnswer
Feb 26, 2025 - 11:20 PM
To install the nano SIM card on the ZEBRA ET40/45 Enterprise Tablet, follow these steps:
1. Ensure that the tablet is powered off.
2. Lift the corner of the battery cover up from the notched area and carefully remove the battery cover from the device.
3. Slide and hold the battery lock switch in the unlock position.
4. While the switch is in the unlock position, rotate the battery up and then remove it from the battery well.
5. If replacing the nano SIM card, remove the existing card by pushing it in and releasing it. The card will eject slightly so that you can remove it.
6. Insert the nano SIM card with the contacts facing down.
7. Push the SIM card in and ensure that it locks into place.
8. Replace the battery, ensuring that the contacts side goes in first.
9. Slide and hold the battery lock switch in the unlock position.
10. Rotate the battery down into the battery well, ensuring it is seated properly.
11. Release the battery lock switch into the lock position.
12. Insert the tabbed end of the battery cover into the slots in the battery well.
13. Rotate the cover down and carefully press down around the edges to ensure it is seated properly.
Please refer to the ZEBRA ET40/45 Enterprise Tablet User Guide for visual illustrations and additional information on installing the nano SIM card.
Add New Comment