Answer

Feb 26, 2025 - 11:13 PM
To charge the POWER PROBE PPMWL1000 Modular Work Light, follow these steps:
1. Ensure that the unit is fully charged before first use. Allow 3 to 4 hours for a full charge.
2. Plug the charger into any 100V-240V AC power source, such as a wall receptacle.
3. Plug the charger cord into the charging port on the base/charging module.
4. Individual light modules must be installed into the base/charging module to be recharged.
5. The light rings on the lighting modules will glow red while the modules are charging.
6. Allow the unit to fully charge until the charging indicating lights on the light modules turn from red to green.
7. It is recommended to charge the light every month if not in constant use, and after each use when used often to ensure battery longevity.
Please refer to the "Charging" section in the instruction manual for more detailed information and illustrations.
Add New Comment