Answer

Feb 26, 2025 - 11:05 PM
To configure SNTP on the FS S5500-48T8SP switch, you can follow the steps outlined in the user guide. Here is a step-by-step guide:
1. Setting the Grade of the SNTP Server:
- Enter global configuration mode.
- Use the command "sntp master [Stratum]" to set the grade of the SNTP server. Replace [Stratum] with the desired stratum value.
2. Enabling the SNTP Server:
- Enter global configuration mode.
- Use the command "sntp master" to enable the SNTP server.
3. Setting the IP Address of the SNTP Server:
- Enter global configuration mode.
- Use the command "sntp server [sntp-version]" to set the IP address and version of the SNTP server. Replace with the actual IP address of the SNTP server.
4. Setting the Interval of Browsing the SNTP Server:
- Enter global configuration mode.
- Use the command "sntp query-interval " to set the interval for the SNTP client to browse the SNTP server. Replace with the desired interval in minutes.
5. Disabling the SNTP Server:
- Enter global configuration mode.
- Use the command "no sntp master" to close the SNTP server.
Please note that these instructions are based on the provided user guide for the FS S5500-48T8SP switch. For more detailed information and additional configuration options, refer to the user guide or contact FS support.
Add New Comment