User Manual Q&AAnswer
Feb 26, 2025 - 11:02 PM
To connect the KVM-tec 6501 Full HD KVM Over IP Extender to your computer and peripherals, please follow these steps:
1. Connect the CON / Remote Unit and the CPU / Local Unit to the included 12V 2A power supply.
2. Connect one end of the USB cable to a USB port on your PC and the other end to the CPU / Local Unit. This will allow you to control your computer remotely using the keyboard and mouse connected to the CON / Remote Unit.
3. Use a network cable to connect the CPU / Local Unit and the CON / Remote Unit.
4. Connect the DVI cable to the DVI socket of your PC and the other end to the DVI socket of the CPU / Local Unit (labeled as PC-in).
5. Connect your monitor to the CON / Remote Unit using a DVI cable.
Once you have completed these steps, your KVM-tec Extender will be ready for use. It is designed to provide reliable performance for many years, with an estimated Mean Time Between Failures (MTBF) of approximately 10 years.
If you need further assistance or have any additional questions about the installation process, you can refer to the instruction manual available for download on the kvm-tec website (www.kvm-tec.com) or visit their Installation channel on their homepage. Alternatively, you can contact kvm-tec directly at +43 2253 81912 for personalized support.
Add New Comment