User Manual Q&AAnswer
Feb 26, 2025 - 10:59 PM
Certainly! Here is a step-by-step guide on how to install the EMTEK Ball Catch with Strike and Screws:
1. Door Prep:
- Determine the location on the door where you want to install the ball catch. It is typically installed on the top edge of the door.
- Mark the centerline of the door edge where the ball catch will be installed.
2. Door Jamb Prep:
- Determine the location on the door jamb where the strike plate will be installed. It should align with the centerline marked on the door edge.
- Mark the xxxx hole locations for the strike plate on the door jamb.
3. Install Strike Plate:
- Using the marked xxxx hole locations, attach the strike plate to the door jamb using the provided screws. Make sure it is securely fastened.
4. Install Ball Catch:
- Insert the ball catch into the hole on the top edge of the door. The ball should be facing towards the strike plate.
- Align the ball catch with the strike plate on the door jamb.
- Securely fasten the ball catch to the door using the provided screws.
That's it! Your EMTEK Ball Catch with Strike and Screws should now be properly installed. Make sure to test the functionality of the ball catch by closing and opening the door to ensure it latches and releases smoothly.
Please note that these instructions are a general guide and may vary slightly depending on the specific model of the EMTEK Ball Catch. For more detailed and model-specific instructions, please refer to the provided installation guide or contact EMTEK customer support.
Add New Comment