Answer

Feb 26, 2025 - 10:46 PM
To install the paper holder spring rod on the EMTEK 2704 Toilet Paper Holder with Spring Rod, please follow these steps:
1. After completing the installation of the mounting plates, trim plates, and posts as mentioned in the installation guide, you are ready to install the paper holder spring rod.
2. Take the spring rod and insert one end into the hole located at the top of one of the trim plates.
3. Push the spring rod through the hole until it comes out from the bottom of the trim plate.
4. Slide the other end of the spring rod into the hole located at the top of the other trim plate.
5. Push the spring rod through the hole until it comes out from the bottom of the second trim plate.
6. Ensure that the spring rod is securely inserted into both trim plates and is centered between them.
7. Once the spring rod is properly inserted, the installation of the EMTEK 2704 Toilet Paper Holder with Spring Rod is complete.
Note: The spring rod is designed to hold the toilet paper roll in place. To use the toilet paper holder, simply slide the paper roll onto the spring rod and it will hold it securely.
Add New Comment