User Manual Q&AAnswer
Feb 26, 2025 - 10:43 PM
To install the TRIO PAOLO D370 IP44 1500LM 15W 4K Ceiling Luminaire Light, please follow the installation instructions provided in the manual. Here is a step-by-step guide:
1. Before starting the installation, make sure to read and understand all the safety instructions mentioned in the manual.
2. Ensure that the power supply is turned off before proceeding with the installation.
3. Identify a suitable location on the ceiling where you want to install the luminaire light. Ensure that the surface is clean and dry.
4. Remove the cover of the luminaire light by gently pulling it downwards. This will expose the internal components.
5. Connect the luminaire light to the power supply. Make sure to match the correct wires (live, neutral, and ground) with the corresponding terminals.
6. Once the connections are secure, carefully place the luminaire light onto the ceiling surface. Align it properly and ensure that it sits flush against the ceiling.
7. Use the provided screws or mounting brackets to secure the luminaire light to the ceiling. Follow the instructions in the manual for the specific mounting method recommended for your installation.
8. After the luminaire light is securely mounted, reattach the cover by aligning it with the base and pushing it upwards until it clicks into place.
9. Turn on the power supply and test the luminaire light to ensure it is functioning correctly.
10. If any adjustments or fine-tuning of the light direction or angle is required, refer to the manual for guidance on how to make these adjustments.
Remember to always refer to the specific instructions provided in the manual for your TRIO PAOLO D370 IP44 1500LM 15W 4K Ceiling Luminaire Light model, as there may be slight variations in the installation process.
Add New Comment