User Manual Q&AAnswer
Feb 26, 2025 - 10:11 PM
To replace the front wheel on your Razor W15128001049 RSF350 with a wire hub, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Before starting, make sure to turn off the power switch and disconnect the charger to avoid potential shock or injury.
2. Gather the required tools: a 14 mm wrench and a 17 mm wrench. These tools are not included with the product.
3. Using the 14 mm and 17 mm wrench, loosen the locknut on the front wheel axle bolt.
4. Slide the axle bolt out and remove the old front wheel.
5. Insert the new front wheel into the front fork.
6. Take note of the hardware sequence for proper arrangement:
- 9-4 Locknut
- 9-3 Washer
- Front Fork
- 9-2 Spacer
- Wheel
- 9-2 Spacer
- Front Fork
- 9-3 Washer
- 9-1 Axle Bolt
7. Tighten the locknut securely to ensure the front wheel is properly affixed.
8. It is crucial to properly adjust and tighten the nuts and bolts to prevent losing control and falling while riding.
For any further assistance or questions, you can visit the Razor website at www.razor.com or call their toll-free number at 866-467-2967. Their customer support is available Monday to Friday from 8:00 am to 5:00 pm Pacific Time.
Add New Comment