Answer

Feb 26, 2025 - 10:07 PM
To install the EMTEK IN4-DOORPULL8 8 Inches Door Pull with Push Plate, please follow the steps below:
1. Install Insert Screws:
- Use a flat head screwdriver to install the provided 3/8-16" threaded inserts flush to the handle.
- Note that threaded insert pairs are provided with 8-32 and 1/4-20 internal threads to be used with corresponding xxxx sizes.
2. Install Thru Bolts:
- Use a #2 Phillips screwdriver to fasten the plate to the handle using the provided #8-32 or 1/4-20 machine screws.
3. Install Pull on the door:
- Position the Door Pull on the door where you want it to be installed.
- Secure it in place using the provided wood screws.
Please refer to the EMTEK IN4-DOORPULL8 8 Inches Door Pull with Push Plate Installation Guide for more detailed instructions and illustrations.
Add New Comment