User Manual Q&AAnswer
Feb 26, 2025 - 09:57 PM
To install the chain or rear wheel on the Razor W15128040012 RSF350 Chain Electric Sport Bike, follow these steps:
1. Using a Phillips screwdriver, loosen the four screws and remove the chain guard.
2. Using a 14 mm and 17 mm wrench, loosen the locknut and axle bolt on the rear wheel.
3. Push the chain tensioner down to loosen the chain and remove the chain from the wheel sprocket and motor sprocket. Push the wheel downward to remove it.
4. Install the new chain or wheel by slipping the chain around the axle bolt. Slide the axle bolt into the slots on the frame. Slide the chain tensioner down and maneuver the chain onto the rear sprocket and motor sprocket.
5. Re-attach the chain guard.
Please note that the required tools for this installation are not included with the product. You will need a Phillips screwdriver, a 14 mm wrench, and a 17 mm wrench.
For further assistance or more detailed instructions, you can visit the Razor website at www.razor.com or call their toll-free number at 866-467-2967, Monday - Friday, 8:00 am - 5:00 pm Pacific Time.
Add New Comment