User Manual Q&AAnswer
Feb 26, 2025 - 09:53 PM
To install the EMTEK EM280409US4 Bar Style Paper Holder, please follow the steps below:
1. Start by installing the mounting plate. Choose a suitable location for the paper holder and mark the desired position on the wall. Use a level to ensure the mounting plate is straight. Secure the mounting plate to the wall using the provided screws.
2. Once the mounting plate is installed, adjust it for level. Use the level to make sure the plate is perfectly horizontal or vertical, depending on your preference. Adjust as needed.
3. Before proceeding, rotate the mounting plate if necessary. This allows you to position the paper holder in the desired orientation. Once you have rotated the plate to the desired position, proceed to the next step.
4. Install the trim plate over the mounting plate. The trim plate is the decorative cover that conceals the mounting hardware. Align the trim plate with the mounting plate and secure it in place using the provided screws.
5. Finally, tighten the set xxxx located on the bottom of the paper holder. This set xxxx ensures that the paper holder is securely attached to the mounting plate and prevents it from rotating or coming loose.
Please refer to the EMTEK EM280409US4 Bar Style Paper Holder installation guide for more detailed instructions and illustrations.
Add New Comment