User Manual Q&AAnswer
Feb 26, 2025 - 09:29 PM
To connect the DYN-PM-440 shaker to the amplifier and signal generator, follow these steps:
1. Connect the shaker/amplifier cable to the shaker and amplifier. The cable should have matching connectors on both ends.
2. Connect the drive signal cable from the signal generator to the shaker. Ensure that the cable is securely connected.
3. Connect the power cable of the amplifier to a power source. Make sure the power cable is properly plugged in.
4. Turn on the amplifier by pushing the on/off button. The amplifier should power up and be ready for use.
5. To adjust the gain of the amplifier, turn the gain xxxx in a clockwise direction. This will increase the gain level.
6. To power down the shaker, turn off the gain button.
Please refer to the user manual for more detailed instructions and illustrations on the connection process.
Add New Comment