User Manual Q&AAnswer
Feb 26, 2025 - 09:27 PM
To connect the DYN-PM-100 shaker to an external signal source, follow these steps:
1. Connect the DC power source to the shaker power input.
2. Connect the drive signal from the external signal source to the shaker signal input.
3. Start the external signal source.
4. Adjust the Gain of the amplifier by turning the Gain xxxx clockwise.
Note: In the external signal mode, the shaker will generate vibrations based on the input signal from the external source.
For more detailed instructions and illustrations, please refer to the "Operation and Installation" section of the DYN-PM-20 20 N PM Shaker User Manual provided.
Add New Comment