User Manual Q&AAnswer
Feb 26, 2025 - 09:20 PM
To wire the EATON CJAU-01-04 Shutters-Blinds Actuator, you can refer to the wiring diagrams provided in the instruction manual. There are different modes and configurations mentioned in the manual, so you need to choose the appropriate wiring diagram based on your specific requirements.
1. Basic mode: This mode is used for simple installations without any additional sensors or control devices. The wiring diagram for the basic mode can be found in the manual.
2. Assign Sensor in Basic Mode: If you want to add a sensor to the basic mode setup, there is a specific wiring diagram and instructions provided in the manual for assigning the sensor.
3. Remove Sensor in Basic Mode: If you want to remove a sensor from the basic mode setup, there are instructions and a wiring diagram in the manual for removing the sensor.
4. Configure application mode: If you have a more complex setup with multiple actuators and sensors, the manual provides instructions on how to configure the application mode. The wiring diagram for this mode can also be found in the manual.
It is important to follow the wiring diagrams and instructions provided in the manual to ensure proper installation and operation of the CJAU-01-04 Shutters-Blinds Actuator. If you have any specific questions or need further assistance, please consult the manual or reach out to the manufacturer for support.
Add New Comment