User Manual Q&AAnswer
Feb 26, 2025 - 09:14 PM
To properly mount the FS GW600-Series Wall Mount Network Cabinet, please follow these steps:
1. Location Guide: Choose a suitable location for mounting the cabinet. Ensure that it is away from direct sunlight, excessive heat, and moisture. Also, consider the weight and load-bearing capacity of the wall.
2. Wall Mounting: Before starting, make sure you have assistance as lifting the cabinet alone is not recommended.
3. Hang the Cabinet: Position the cabinet against the wall at the desired height. Use a level to ensure it is straight. Mark the mounting holes on the wall using a pencil.
4. Mount Nut: Drill holes at the marked positions on the wall and insert the provided mount nuts into the holes.
5. Twist Nut: Align the cabinet's mounting holes with the mount nuts on the wall. Insert the screws through the holes and into the mount nuts. Use a screwdriver to tighten the screws securely.
Please refer to the FS GW600-Series Wall Mount Network Cabinet User Guide for more detailed instructions and illustrations.
Add New Comment