User Manual Q&AAnswer
Feb 26, 2025 - 09:03 PM
To install the EGLO 35093 Sayulita Ceiling Light with Fan, please follow these steps:
1. Before starting the installation, ensure that the power is disconnected and/or the mains switched off at the circuit box.
2. Make sure you have a suitable fixing point on the ceiling that can support a 25 kg load.
3. Allow for a minimum clearance of 2.3 m between the floor and the bottom of the blades.
4. The fan must be earthed for safety.
5. Connect the fan to a mains supply only. Do not connect it to alternate power systems such as Solar, Wind, Battery, etc.
6. Use ONLY the EGLO controller supplied with your fan.
7. Do NOT change the direction of your fan while it is spinning.
8. Do NOT insert any object into the fan blades while it is in operation, as this can cause damage to the fan and personal injury.
9. The fan is considered suitable for use in dry, closed indoor spaces only. It is not suitable for use in bathrooms or other consistently damp areas.
10. If you observe any unusual oscillating movement, immediately stop using the ceiling fan and contact the manufacturer, its service agent, or suitably qualified persons.
For a more detailed installation guide, please refer to the EGLO 35093 Sayulita Ceiling Light with Fan Instruction Manual provided with the product.
Add New Comment