Answer

Feb 26, 2025 - 08:52 PM
To install the EGLO 35096 Ceiling Fan LED black, please follow these steps:
1. Before starting the installation, ensure that the power is disconnected and/or the mains switched off at the circuit box.
2. Make sure that the fixing point for the ceiling fan is capable of supporting a 25 kg load.
3. Allow for a minimum clearance of 2.3 m between the floor and the bottom of the fan blades.
4. The fan must be earthed for safety.
5. Connect the fan to a mains supply only. Do not connect it to alternate power systems such as Solar, Wind, Battery, etc.
6. Use ONLY the EGLO controller supplied with your fan.
7. Do not change the direction of the fan while it is spinning.
8. Do not insert any objects into the fan blades while it is in operation to avoid damage and personal injury.
9. Ensure that the ceiling fan is installed in a dry, closed indoor space. It is not suitable for use in bathrooms or consistently damp areas.
10. If you observe any unusual oscillating movement, immediately stop using the fan and contact the manufacturer or a suitably qualified person.
For a more detailed installation guide, please refer to the instruction manual provided with the product.
Note: It is highly recommended to have a suitably qualified and licensed electrical contractor perform the installation to ensure safety and proper functioning of the ceiling fan.
Add New Comment