Answer

Feb 26, 2025 - 08:47 PM
To connect the DYN-MS-250 shaker to the amplifier and signal generator, follow these steps:
1. Connect the shaker/amplifier cable to the shaker and amplifier. The shaker connector configuration can be found in the manual.
2. Connect the drive signal cable to the signal generator.
3. Connect the power cable of the amplifier.
4. Turn on the amplifier by pushing the on/off button.
5. To increase the gain, turn the gain xxxx in a clockwise direction.
6. To power down the shaker, turn off the gain button.
Please refer to the "Amplifier" section in the manual for more detailed instructions and illustrations.
Add New Comment