User Manual Q&AAnswer
Feb 26, 2025 - 08:23 PM
To set the output voltage on the PeakTech 6220 DC-Switching Power Supply, follow these steps:
1. Before connecting the mains cable to a mains socket, make sure that the available mains voltage matches the mains voltage 110 - 240 V AC required for the switching power supply (see voltage information on the back of the unit).
2. Switch on the switching power supply.
3. Locate the potentiometer for voltage adjustment on the panel. It is used to adjust the output voltage.
4. Turn the potentiometer clockwise to increase the output voltage or counterclockwise to decrease the output voltage.
5. Set the required output voltage for the external device on the switching power supply.
Note: Make sure to connect the positive input of the external device to the positive output (+red) and the negative input of the external device to the negative output (-black) of the switching power supply.
Please refer to the PeakTech 6220 DC-Switching Power Supply User Manual for more detailed instructions and safety precautions.
Add New Comment