User Manual Q&AAnswer
Feb 26, 2025 - 08:03 PM
To mount the Ashcroft B400 and B700 series pressure switches, you have two options. You can either mount them externally using three holes on the enclosure, as shown in the general dimension drawing, or you can mount them directly on the pressure line using the pressure connection. When tightening the control to the pressure line, always use the wrench flats or hex on the lower housing for proper installation.
Please note that these controls are precision instruments and should never be left with internal components exposed. During installation, make sure that the covers are in place and the conduit openings are closed, except when actually working on the control.
For more detailed instructions and illustrations, please refer to the "MOUNTING B400 AND B700 SERIES" section in the Ashcroft B400 Snap Action Switches for Pressure Control Instruction Manual.
Add New Comment