User Manual Q&AAnswer
Feb 26, 2025 - 09:32 AM
To assemble the WINNCARE MI0131 Mangar Sit U Up Pillow, follow these steps:
1. Insert the spreader bar into the Sit-u-Up.
2. Slide the headrest down the backrest, ensuring it is positioned at least 7cm down from the top of the backrest.
3. Place the Sit-u-Up on the bed with the spreader bar against the headboard.
4. Lead the air hose to the side of the bed where the Airflo 12 compressor will be placed and fold the strut towards the headboard.
5. Connect the air hose from the Sit-U-Up to the Airflo 12 compressor air outlet socket.
6. Connect the Push Button Hand Control to the socket.
7. Place the Airflo 12 compressor by the side or under the bed in an out-of-the-way position.
8. Inflate the Sit-u-Up by pressing 'up' on the hand control.
To use the WINNCARE MI0131 Mangar Sit U Up Pillow, follow these steps:
1. To raise the Sit-u-Up, press 'up' on the hand control. Release the button to stop at any point.
2. To lower the Sit-u-Up, press 'down' on the hand control.
Please refer to the separate Airflo 12 compressor instructions for more details on operating the Sit-u-Up.
Note: It is important to read and fully understand the user instructions and warnings provided in the manual before using the Sit-u-Up.
Add New Comment