User Manual Q&AAnswer
Feb 26, 2025 - 08:00 AM
For Raspberry Pi OS Installation:
Step 1: Connect to the internet and install the Argon ONE Configuration Script by running the following command in the Terminal:
```
curl https://download.argon40.com/argon1.sh
```
Step 2: Enable the Power Button and volume buttons by opening the Terminal App and typing the command:
```
argonone-ir
```
Follow the instructions provided in the Terminal. It is recommended to enable the Power button first and then reboot before enabling other buttons.
For LibreELEC Installation:
Step 1: In KODI, go to the "Add-ons" side bar and navigate to "Install from Repository" > "All repositories" > "Program add-ons". Install both the "Raspberry Pi Tool" and "System Tools" add-ons. Reboot after installing both add-ons.
Step 2: Download the Argon Forty Remote Add-on Zip file from the provided link and save it to a USB thumb drive.
Step 3: In LibreELEC, go to SETTINGS > SYSTEMS > Add-ons > General and enable "Unknown Sources".
Step 4: Ensure that you are connected to the internet and insert the USB thumb drive with the Argon Forty Remote Add-on Zip file.
Step 5: Go back to the HOME screen, navigate to Add-ons, click on "Install from zip file", and select the Argon Forty Remote Add-on Zip file. Reboot after the installation. Ignore any error messages, if encountered.
Step 6: Confirm that the Argon Forty Remote is properly installed when you see the Raspberry Pi Tools and Argon Forty Device Configuration icons.
To configure the Argon ONE settings, you can edit or change them in the SETTINGS tab of the Argon Forty Add-on.
If you have any further questions or issues, you can contact Argon support at cs@argon40.com or visit their website at www.argon40.com.
Add New Comment