User Manual Q&AAnswer
Feb 26, 2025 - 07:34 AM
To change the blade on the , follow these steps:
1. Disconnect the air supply before changing blades to ensure safety.
2. Use the provided hex key to remove the retaining xxxx and retaining spacer.
3. Place the new blade onto the spindle.
4. Replace the spacer and xxxx , and secure them with the hex key. Do not over tighten.
5. Check that the replacement blade is not damaged, such as cracks or deformations.
6. Also, check the mounting washer to ensure it is not deformed, burred, or notched.
Please refer to the manual for visual illustrations and additional information on changing the blade.
Add New Comment