User Manual Q&AAnswer
Feb 26, 2025 - 07:27 AM
To refill the smoke oil in the ANCEL S1000 Automotive Diagnostic Leak Detector, follow these steps:
1. Turn off the ignition of the vehicle and make sure the engine is off.
2. Locate the oil refill port (labeled as "A" in the product structure diagram).
3. Use the provided funnel to pour the smoke oil into the oil refill port. Be careful not to pour oil onto the surface of the unit.
4. Check the oil level gauge (labeled as "L" in the product structure diagram) to ensure that the oil level is between the MIN and MAX lines. If the oil level is below the MIN line, refill the oil.
5. After refilling the oil, securely close the oil refill port.
Note: The ANCEL S1000 is compatible with mineral oil-based baby oil, such as Johnson & Johnson Pink bottle. Pure #5 white oil is also recommended if available.
Please refer to the user manual for more detailed instructions and safety precautions regarding the use and maintenance of the ANCEL S1000 Automotive Diagnostic Leak Detector.
Add New Comment