User Manual Q&AAnswer
Feb 26, 2025 - 07:22 AM
To assemble the Emerio FN-114204.10 Free Stand Fan, please follow these steps:
1. Assemble the stand:
- Connect the two parts of the base together into a cross.
- Unscrew the four screws from the base.
- Attach the standing shaft onto the base and fix firmly with the four screws.
- Rotate the fasten set out of the standing shaft. Put the cover piece on the base through the standing shaft.
- Rotate back the fasten set.
2. The whole assembly:
- Pull the height adjustment pipe out and tighten the fasten set.
- Link the fan main body and the height adjustment pipe together by the fastening xxxx and then fix them.
3. Rear grille assembly:
- Unscrew the blade fastening xxxx and the guard fastening xxxx from the motor shaft.
- Fix the rear guard onto the two pillars of the motor front shell.
- xxxx the guard fastening xxxx tightly in a clockwise direction.
4. The assembly of the fan blade:
- Insert the fan blade onto the shaft, ensuring the blade fits properly onto the clip on the shaft.
- Tighten the blade xxxx onto the shaft. Note: The blade xxxx should be tightened in an anti-clockwise direction.
5. Front grille assembly:
- Put the front guard against the rear guard and fix it with the clamping ring. Make sure the clamping ring is set properly at the rim of the fan guards.
- Tighten the xxxx on the clamping ring.
Please refer to the instruction manual for visual illustrations and further details on the assembly process.
Add New Comment