User Manual Q&AAnswer
Feb 26, 2025 - 06:59 AM
To properly clean and maintain the Mountain Top Slide™ cargo slide, follow these steps:
1. General Cleaning:
- Use water with normal car shampoo to clean the Mountain Top Slide™ on a regular basis.
- Clean the base frame rails regularly by removing the deck from the base frame.
- Keep the base frame rails clean and free of debris for proper operation.
- Use a brush or vacuum cleaner to remove debris from the base frame rails.
- Avoid using abrasive cleaning tools such as steel wool or hard brushes.
- Rinse off soap foam thoroughly with fresh water and dry with a clean cloth.
- Do not use petrol, strong alkaline, or acid on the surface.
2. Maintenance:
- It is recommended to perform maintenance on the Mountain Top Slide™ every 6 months.
- To perform proper maintenance, detach the deck from the base frame.
- Re-tighten all bolts connecting the base frame to the truck bed to 21 Nm if necessary.
- Check the locking pins located at the back of the deck. They should retract completely when the deck handle is pulled.
- If the locking pins do not retract completely, tighten the wire connector underneath the deck until the locking pins retract properly again.
Please refer to the owner's manual for more detailed instructions and illustrations on cleaning and maintenance procedures.
Add New Comment