User Manual Q&AAnswer
Feb 26, 2025 - 06:28 AM
To assemble the Coopers OF STORTFORD K276 Raised Tomato Planter with Cover, please follow these steps:
1. Unpack the components carefully and ensure all parts have been removed from the packaging.
2. Attach the leg plugs (H) to the tops of the legs (C) and attach the leg pads (D) to the bottom of the legs (C).
3. Turn the planter (A) bottom down and click the wheels into place. The planter can be moved around on wheels or legs can be fitted to keep it in position.
4. Insert the legs (C) into the bottom of the planter. Use a small hammer if needed to fit them in place.
5. Turn over the assembly to stand on its legs and insert the separator (B) into the planter (A).
6. Assemble the tubes as shown, pushing down the verticals (G-32cm tubes). Fit the corner connectors (E) and push in the horizontal tubes (F-36cm tubes).
7. Position the cover over the framework and fix it with ties. Zip up on either side of the middle panel to close. Unzip and roll up the middle panel and use a tie to hold it up and open.
For a visual reference, please refer to the assembly overview diagram provided in the instruction manual.
Note: Always place the planter on a level surface for stability.
If you have any further questions or need additional assistance, please refer to the Coopers OF STORTFORD K276 Raised Tomato Planter with Cover instruction manual or contact Coopers of Stortford directly.
Add New Comment