User Manual Q&AAnswer
Feb 26, 2025 - 06:23 AM
To install the Tomato Soft Touch Sitter with Stationary Base, follow these steps:
1. Pelvic Harness Installation:
a. Thread the crotch strap up through the bottom center slot.
b. Thread the right waist strap up through the right slot.
c. Thread the left waist strap up through the left slot.
2. Chest Harness Installation:
a. Unclip the right chest strap and slide the strap through the left shoulder slot.
b. Thread the strapping around the back and out the right shoulder slot.
c. Clip the strap to the top of the right shoulder chest harness.
d. Unclip the right lateral strap and slide the strap through the left waist slot.
e. Thread the strapping under the crotch loop and up and out the right slot.
f. Reattach the chest clip to the bottom of the right side of the chest harness.
3. Attachment Strap Installation:
a. Thread the strap down through the left waist slot.
b. Thread the strap under the sitter on top of the loop and up the right waist slot.
4. Attachment Straps & Applications:
- To attach to a chair: Use the attachment straps to secure the sitter to a chair.
- To attach to a Special Tomato Wooden Base: Use the attachment straps to secure the sitter to the wooden base.
- To attach to a Special Tomato Floor Base: Use the attachment straps to secure the sitter to the floor base.
- To attach to a Jogger, EIO, or Push Chair: Use the attachment straps to secure the sitter to the respective product.
Please refer to the user manual for visual diagrams and further instructions on the installation process.
Add New Comment