User Manual Q&AAnswer
Feb 26, 2025 - 06:02 AM
To configure VLANs on the Hirschmann BRS20-8TX-EEC Managed Industrial Switch, you can follow the steps outlined in the product's owner's manual. Here is a step-by-step guide:
1. Connect to the switch: Use a computer with a web browser or a terminal emulation program to connect to the switch's management interface. You can use the USB-C port or the network port for this purpose.
2. Access the management interface: Open a web browser and enter the IP address of the switch in the address bar. Alternatively, you can use the USB-C port to access the command line interface (CLI) using a terminal emulation program.
3. Login to the management interface: Enter the username and password when prompted. The default username is "admin" and the default password is "admin" as well.
4. Navigate to the VLAN configuration: Once logged in, navigate to the VLAN configuration section. This may be located under a "Network" or "VLAN" tab or menu option.
5. Create VLANs: In the VLAN configuration section, you can create new VLANs by specifying a VLAN ID and a name for each VLAN. You can also configure other parameters such as VLAN tagging, VLAN membership, and VLAN priority.
6. Assign ports to VLANs: After creating VLANs, you need to assign the switch ports to the appropriate VLANs. This can usually be done by selecting the desired VLAN and the corresponding ports, and then applying the configuration.
7. Save and apply the configuration: Once you have finished configuring the VLANs, make sure to save and apply the changes. This will ensure that the VLAN configuration is active and will persist after a reboot.
Please note that the exact steps and menu options may vary slightly depending on the firmware version of your switch. For detailed instructions and illustrations, refer to the "Configuration" section of the Hirschmann BRS20-8TX-EEC Managed Industrial Switch Owner's Manual.
Add New Comment