User Manual Q&AAnswer
Feb 26, 2025 - 06:01 AM
To prepare your door for the installation of the EMTEK MSDSRFMNTBLT Rectangular Barn Door Privacy Lock and Flush Pull, follow these steps:
1. Measure and mark the desired location for the lock and flush pull on the door. Ensure that the location is suitable for your needs and meets any applicable building codes or regulations.
2. Use a template or measuring tools provided with the product to mark the necessary cutouts on the door. The template should indicate the size and shape of the cutouts required for the flush pull and lock body.
3. Carefully cut out the marked areas on the door using appropriate tools, such as a drill and a jigsaw. Follow the manufacturer's instructions for cutting the holes to ensure accurate and clean cuts.
4. Once the cutouts are complete, ensure that they are clean and free of any debris or rough edges. Use sandpaper or a file to smooth out any rough areas if necessary.
5. Check the fit of the flush pull and lock body in the cutouts. They should fit snugly and flush with the surface of the door. Make any adjustments as needed to ensure a proper fit.
By following these steps, you will have prepared your door for the installation of the EMTEK MSDSRFMNTBLT Rectangular Barn Door Privacy Lock and Flush Pull. Please refer to the product's installation guide for further details and specific instructions.
Add New Comment