User Manual Q&AAnswer
Feb 26, 2025 - 05:59 AM
To set the trigger mode on the Linshang LS128 UV Energy Meter, follow these steps:
1. Make sure the meter is in the OFF mode.
2. Long press the "POWER" button to enter the setting mode.
3. In the setting mode, use the "SELECT" button to navigate and select the trigger mode option (Auto/Manual).
4. Short press the "POWER" button to confirm your selection.
5. If you choose Auto, the meter will automatically start a measurement when the power value is greater than the selected trigger value.
6. If you choose Manual, you can manually start and end a measurement by short pressing the "POWER" button.
7. Short press the "POWER" button to confirm and move on to the next setting.
Note: If the production line is long and it takes a while to reach the UV lamp position, it is recommended to select the "AUTO" mode.
For more detailed instructions and information, please refer to the Linshang LS128 UV Energy Meter User Manual.
Add New Comment