How do I install the MaxLite LED Architectural Vanity Bar? (LED Lighting ML8LA Series MaxLite LED Architectural Vanity Bar Instruction Manual)

Answer

manuals.plus

Feb 26, 2025 - 05:47 AM

To install the MaxLite LED Architectural Vanity Bar, please follow these steps:

1. Before starting the installation, turn off the electrical power at the fuse or circuit breaker box.

2. Verify that the supply voltage is correct by comparing it with the luminaire label information.

3. Make all electrical and grounded connections in accordance with the National Electrical Code and any applicable local code requirements. Use UL approved wire connectors for all wiring connections.

4. Remove the plastic housing of the fixture.

5. Take out the LED lamp and ensure it is intact. Remove the diffuser by turning it counter-clockwise.

6. Install the screws on the junction box. Partially tighten the machine screws in the junction box.

7. Connect the LED wire. Take out the wire connectors and connect the input wire from the fixture with the internal wire from the junction box (ground wire to ground wire, L to L, N to N).

8. Install the Base Plate. Align the holes of the rear plate of the light fixture with the machine screws and turn clockwise to lock the plate into place. Tighten the machine screws to ensure the plate is fixed firmly.

9. Depending on the distance of the LED lamp's body pore, make the plastic bolts into the wall.

10. Put the xxxx into the body of the LED light and rotate it to let it lock in the crossbar.

11. Use a round nut to lock the body of the lights.

12. Finally, put the M4*60 xxxx into the plastic nail to prevent the rotation of the light's body.

13. For CCT selectable models, select the preferred CCT (refer to Fig. B in the manual).

14. Install the cover by reinstalling the diffuser and turning it clockwise until securely fastened.

15. Install the plastic housing, ensuring the end base is on the lamp base.

16. xxxx the round nut to connect all the parts firmly.

Please note that these instructions are a summary of the installation process. For more detailed instructions and illustrations, please refer to the MaxLite LED Architectural Vanity Bar Instruction Manual.